Wood Block Oak
adhesive for bonding wood block parqet boards
beech parquet flooring
reclaimed beech flooring
reclaimed parquet flooring
Beech (Fagus) is a genus of deciduous trees in the family Fagaceae, native to temperate Europe, Asia and North America. Recent classification systems of the genus recognize ten to thirteen species in two distinct subgenera, Engleriana and Fagus. The Engleriana subgenus is found only in East Asia.
Acer is a genus of trees or shrubs commonly known as maple. The genus is placed in the Sapindaceae family. There are approximately 128 species, most of which are native to Asia, with a number also appearing in Europe, northern Africa, and North America.
An oak is a tree or shrub in the genus Quercus Latin "oak tree" of the beech family, Fagaceae. There are approximately 600 extant species of oaks. The common name "oak" also appears in the names of species in related genera, notably Lithocarpus (stone oaks), as well as in those of unrelated species such as Grevillea robusta (silky oaks) and the Casuarinaceae (she-oaks).
Muhuhu (Brachlaena hutchinsii) is a species of tropical hardwood from Africa. The main countries of distribution are Kenya, Tanzania and Uganda. In addition the range does extend as far as Angola. Also known as Silver Oak, Muhugwe and Kipugupugo.
Burmese Teak is indigenous to the tropical forests of southern and south-eastern Asia: areas such as India, Myanmar and South-East Asia. Subsequently Teak was introduced into tropical Africa. This introduction was mainly by German colonialists, initially in Nigeria, Tanzania and Ghana during the late 19th century, and later plantations into Cameroon and Togo.
Reclaimed Wood Block in Manchester, Reclaimed Parquet Flooring in Preston, Reclaimed Wood Block in Preston
Actually this is Burmese Teak (Tectona Grandis). Saplings taken from Burma and planted in Africa yielded a crimson red timber when eventually harvested. Mineral and soil differences effected this anomaly which proved to be highly prized, and it was used in prestigious applications such as the Bank of England, stock exchange, the boardrooms of Tate and Lyle etc.
wooden flooring will have to be mounted at the final stage, after any plastering or concrete has wholly dried out (enable at least 1 month for every inch depth of concrete, screed or render), and before redecorating. The blocks will have to be carefully spread out in small piles in the room the place they are to be laid (or a similar adjoining room) to permit as full air circulation as viable.
Full acclimatisation can take 2 – 3 weeks, relying on whether or not the blocks are new (i.E. Kiln dried) or reclaimed. All wood floors are in charge to a few enlargement and contraction relying on the relative humidity within the constructing. This seasonal action is a usual attribute of wooden floors and it under no circumstances stops, regardless of the age of the wooden floor. Important heating tends to dry the atmosphere and so may just minimize the blocks very fairly for the period of winter months (see our web publication submit on web page conditions).
Skirting boards are excellent geared up after installation of the substrate as they are going to quilt the enlargement hole (approx 15mm) left across the perimeter of the room.
To calculate the rectangular metres required, multiply the length by means of the breadth of the room after which add 10 – 20% wastage depending on the scale of the room (larger rooms require less wastage), the quantity of cuts required and the sample to be used.
Once you have determined from the feasible parquet pattern choices (some of which might be shown below) you should establish the significant factor from the place you to put the blocks, repeatedly referred to as the ‘dragon line’. Then by using dry laying a line of the pattern in the reverse path you make sure there's an equal pattern of the parquet blocks across the floor. Then glue the blocks in place working a line at a time. Allowing a 15mm expansion hole all around the edge of the room. This gap is commonly protected via skirting, however, can be included by using 15-20mm moulding, (fixed to the walls, no longer the ground) if the skirting is already in location. Fixing: One method of fixing block floor is to glue the blocks to a substrate floor. Two it is possible to secret nail wood block floors to a wood substrate. You do not use a flexible adhesive when gluing blocks as they are typically small portions of timber and as a consequence, any enlargement or contraction is at a minimal. The inflexible adhesive encouraged is Lecol 5500. In case you are installing new greater continental-form blocks, it might be higher to use a bendy adhesive comparable to Sikabond T54. N.B. T54 adhesive cannot be used with old blocks which still have bitumen glue on them.
Installing: Reclaimed parquet blocks may just have to be ready: they could also be soiled and have bitumen on the underside which can require scraping with a chisel or scraper if there are above all thick areas. You don’t have to cast off the entire historical adhesive – simply any that is free or especially thick. Make certain the mattress of new adhesive is thick ample to enable level putting of the blocks permitting for the maximum depth of the block and the historical adhesive. The tongues and grooves have to be away from any grime or debris, once more making use of a small chisel scraped along the sides to be certain a decent match for the blocks when laid. Don’t be too worried about grime and surface scratches as that can be sanded out later.
Sanding & Filling: Sanding must be carried out carefully and methodically to avert ugly scores or ridges. It is advised to hire an orbital finishing sander for the principal part of the room and in addition an aspect sander. New blocks with a micro bevel all round won't want sanding at all, and those and not using a micro-bevel would require a high-quality sanding only. Reclaimed blocks may just require somewhat more sanding. If required any knots or blemishes can also be filled with a wooden filler. In order to get a excellent colour match, the ‘timber flour’ from the ultimate fine sanding can also be mixed with a transparent resin (e.G. Lecol 7500). The areas filled will then need a final sanding before finishing. Sealing: The first-rate finishes to protect a substate are both a water-based lacquer or a difficult wax oil.
Entandrophragma cylindricum, commonly known as the sapele or sapelli, is a large tree native to tropical Africa. The tree is also known as aboudikro. There are protected populations and felling restrictions in place in various countries.
Bilinga (also called Aloma in Germany and Opepe in England) is an African wood, from Nauclea diderrichii trees in the Rubiaceae family.
The wood, which grows across tropical Africa from Sierra Leone to Uganda, has about the same density as true hickory, but is not quite as strong. The wood is extremely heavy. The heartwood is golden yellow to orange yellow, and slightly shimmering. The sapwood has an interlocking grain.
Millettia stuhlmannii, commonly known as panga panga, is a well-known species of timber tree that is native to the southeastern Afrotropics. The alternative name partridge wood refers to the light and dark patterns of its heartwood, which is said to form ‘partridge-breast’ figures. The wood of the tropical species M. laurentii has similar qualities and uses, but is slightly darker, and lacks the copious yellowish white resin of the heartwood vessels. Its foliage is similar to that of Pterocarpus rotundifolius, and it may be confused with the latter when observed from a distance.